50 changed files with 52 additions and 1108 deletions
--- a/DEPLOYING.md
+++ b/DEPLOYING.md
@ -1,33 +0,0 @@
-# Deploying a production instance
-Hi fellow sysadmins!
-First of all, I want to thank you for using my piece of software.
-The instructions can be found below
-
-## Deploying a basic instance
-To deploy a basic instance for general public use, follow these simple steps:
-1. Clone this repo
-2. Copy `docker-compose.prod.yml` to `docker-compose.yml` and edit it to fit your environment
-3. Now, there are a few config files that need to be edited by you: `.env`, `filed/.env` and `janitord/.env`. Each directory contains an `.env.example`, and the configuration is pretty straightforward. However, if you are lost check this out: [filed config](#filed-configuration), [janitord config](#janitord-configuration).
-4. Configure fileD using `filed/config/filed.toml`. The example is in the same folder. Example contains a lot of self-documenting comments, so it should be pretty simple too.
-5. Set `REDIS_PASS` to a secure long string. Not exactly required, but this is something you would want to do
-6. Create and start containers with `docker-compose up -d`
-7. Route your top level reverse proxy to the `caddy` service or to the port that you opened via the docker compose file.
-
-## More extensive configuration
-Well, generally, time-wise, it is not really a good idea to create a custom services configuration.
-However, I will guide you through the basic minimal configuration.
-
-Basically, the most minimal blek!File is a fileD service connected to a redis database. 
-I think that if you are clinically insance, you can set these up as a systemd services or a `screen`ed program.
-
-However, its not really recommended to run this without janitorD as unused files will just clog up your filesystem. 
-The two requirements for janitorD are to have access to the fileD's usercontent directory and the Redis database. 
-The default docker configuration mounts `/opt/user_content` to the same volume for both fileD and janitorD.
-
-## FileD configuration
-Unless you are running in some kind of super customized docker compose environment, just copying the `.env.example` to `.env` should be enough to get it to run.
-
-Don't forget to set the `REDIS_PASS` to the same value across all services
-
-## JanitorD configuration
-Same as [filed config](#filed-configuration), don't forget to set `REDIS_PASS` to a valid value
--- a/README.md
+++ b/README.md
@ -1,3 +1,10 @@
+| ⚠️ This is in a rather early stage of development and shouldn't be deployed |
+| --------------------------------------------------------------------------- |
+
+Even though this project is mature enough to be deployed in a public instance,
+this is highly discouraged.  
+However, if you do this, be prepared for [DOS](https://en.wikipedia.org/wiki/Denial-of-service_attack) issues and API changes.
+<br/>

 <h1 align='center'>
    <img src="./filed/static/android-chrome-192x192.png"/>
@ -9,21 +16,6 @@ blek! File is a free service that would help you with file sharing.

 The principle is very simple: you upload a file, then download it from another device. The file will be deleted after 1 download or 30 minutes.

-## Public instances
-List of official instances
-
-| Name | Administrator | URL |
-| --- | --- | --- |
-| 🌠 blek! File | b1ek &lt;me@blek.codes&gt; | [https://file.blek.codes](file.blek.codes) |
-
-To add your instance in this list, fork and open a PR.
-
-To qualify, your instance must be having:  
-1. Uploads without a password turned on
-2. Have proper ToS
-3. Come up with a unique name
-4. Have a public administrator email
-
 ## Licensing
 This software is released under GPL3 license, a copyleft license that protects users' freedom by ensuring that all future copies of this software are open source as well.

--- a/conf/caddy/Caddyfile
+++ b/conf/caddy/Caddyfile
@ -4,11 +4,4 @@
        uri * strip_prefix /qr
        reverse_proxy http://qr
    }
-    handle /resource/internal/* {
-        respond 403
-    }
-    handle /resource/* {
-        uri * strip_prefix /resource
-        reverse_proxy http://resourced
-    }
 }
--- a/containers/go-dev.Dockerfile
+++ b/containers/go-dev.Dockerfile
@ -1,10 +0,0 @@
-FROM golang:alpine
-
-RUN go install github.com/cosmtrek/air@latest
-
-WORKDIR /opt/code
-
-# The directory will be mounted
-# COPY . .
-
-CMD [ "air", "-c", ".air.toml" ]
--- a/containers/rust-dev.Dockerfile
+++ b/containers/rust-dev.Dockerfile
@ -7,6 +7,6 @@ RUN cargo install cargo-watch && \

 RUN apt update && \
    apt install nodejs npm -y --no-install-recommends && \
-    npm i -g uglify-js html-minifier
+    npm i -g uglify-js

 CMD [ "/opt/code/dev-entry.sh" ]
--- a/docker-compose.dev.yml
+++ b/docker-compose.dev.yml
@ -7,7 +7,6 @@ services:
        networks:
            bfile:
        volumes:
-            - './.git:/opt/code/.git'
            - './filed:/opt/code'
            - './filed/config:/etc/filed'
            - '/opt/code/target'
@ -21,15 +20,6 @@ services:
        volumes:
            - './janitor:/opt/code'
            - './volatile/files:/opt/user_uploads'
-    resourced:
-        build:
-            context: containers
-            dockerfile: go-dev.Dockerfile
-        networks:
-            bfile:
-        volumes:
-            - './resource:/opt/code'
-            - '/opt/code/tmp'
    caddy:
        image: caddy:alpine
        volumes:
--- a/docker-compose.prod.yml
+++ b/docker-compose.prod.yml
@ -2,8 +2,8 @@ version: '3.7'
 services:
    filed:
        build:
-            context: .
-            dockerfile: filed/Dockerfile.prod
+            context: filed
+            dockerfile: Dockerfile.prod
        networks:
            bfile:
        volumes:
@ -19,15 +19,6 @@ services:
        volumes:
            - './janitor:/config:ro'
            - './volatile/files:/opt/user_uploads'
-    resourced:
-        build:
-            context: resource
-            dockerfile: Dockerfile.prod
-        networks:
-            bfile:
-        pid: host # prefork
-        volumes:
-            - './resource:/opt/cont'
    caddy:
        image: caddy:alpine
        volumes:
--- a/filed/Cargo.lock
+++ b/filed/Cargo.lock
@ -358,7 +358,7 @@ dependencies = [

 [[package]]
 name = "filed"
-version = "0.2.0"
+version = "0.1.0"
 dependencies = [
 "argon2",
 "askama",
--- a/filed/Cargo.toml
+++ b/filed/Cargo.toml
@ -1,6 +1,6 @@
 [package]
 name = "filed"
-version = "0.2.0"
+version = "0.1.0"
 edition = "2021"

 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html
--- a/filed/Dockerfile.prod
+++ b/filed/Dockerfile.prod
@ -2,17 +2,16 @@
 FROM rust:alpine as builder

 WORKDIR /opt/build
-COPY filed .
-COPY ./.git ./.git
+COPY . .

-RUN apk add --no-cache git musl-dev upx nodejs yarn && \
-    yarn global add uglify-js@3.17.4
+RUN apk add --no-cache musl-dev upx nodejs yarn && \
+    yarn global add uglify-js

 RUN cargo b -r
 RUN strip target/release/filed && upx --best target/release/filed

 # --- deploy ---
-FROM alpine:3.17
+FROM busybox:musl

 RUN mkdir /config
 WORKDIR /config
--- a/filed/build.rs
+++ b/filed/build.rs
@ -1,5 +1,5 @@

-use std::{fs, path::PathBuf, ffi::OsStr, process::Command, error::Error};
+use std::{fs, path::PathBuf, ffi::OsStr, process::Command};

 use css_minify::optimizations::{Minifier, Level};

@ -9,12 +9,6 @@ fn asset_path(asset: &PathBuf) -> PathBuf {
    path
 }

-fn template_path(template: &PathBuf) -> PathBuf {
-    let mut path = template.components().take(template.components().count() - 2).collect::<PathBuf>();
-    path.push(template.components().last().unwrap());
-    path
-}
-
 fn extfilter(valid: String, x: Option<&OsStr>) -> bool {
    if x.is_none() {
        return false
@ -23,23 +17,9 @@ fn extfilter(valid: String, x: Option<&OsStr>) -> bool {
    ext == valid
 }

-fn system(cmd: &str, args: &[&str]) -> Result<String, Box<dyn Error>> {
-    let out = Command::new(cmd)
-        .args(args)
-        .output()
-        ?;
-
-    if out.stderr.len() != 0 {
-        panic!("Got this while running {cmd} with \"{}\": {}", args.join(" "), String::from_utf8(out.stderr).unwrap())
-    }
-
-    Ok(String::from_utf8(out.stdout)?)
-}
-
 fn main() {

    println!("cargo:rerun-if-changed=static/assets");
-    println!("cargo:rerun-if-changed=templates/source");

    let assets = fs::read_dir("static/assets").unwrap();
    let assets = assets
@ -72,45 +52,11 @@ fn main() {

    scripts.iter().for_each(|asset| {
        Command::new("uglifyjs")
+            .arg("-c")
            .arg(asset)
            .arg("-o")
            .arg(asset_path(asset))
-            .arg("-c")
            .spawn()
            .unwrap();
-    });
-
-    // precompile templates
-    let templates = fs::read_dir("templates/source").unwrap();
-    let templates = templates
-        .map(|x| x.unwrap().path().canonicalize().unwrap())
-        .filter(|x| extfilter("html".into(), x.extension()))
-        .collect::<Vec<PathBuf>>();
-    
-    templates.iter().for_each(|template| {
-        Command::new("html-minifier")
-            .arg(template.canonicalize().unwrap())
-            .arg("--collapse-whitespace")
-            // .arg("--minify-js")
-            // .arg("--minify-css")
-            // .arg("--keep-closing-slash")
-            .arg("--output")
-            .arg(template_path(template))
-            .spawn()
-            .unwrap();
-        
-    });
-
-    let commit = system("git", &["rev-parse", "HEAD"]).map_err(|x| x.to_string());
-    let branch = system("git", &["rev-parse", "--abbrev-ref", "HEAD"]).map_err(|x| x.to_string());
-
-    match commit {
-        Err(err) => panic!("Can't get commit: {}", err),
-        Ok(commit) => println!("cargo:rustc-env=COMMIT_HASH={commit}")
-    }
-
-    match branch {
-        Err(err) => panic!("Can't get commit: {}", err),
-        Ok(branch) => println!("cargo:rustc-env=COMMIT_BRANCH={branch}")
-    }
+    })
 }
--- a/filed/config/filed.toml.example
+++ b/filed/config/filed.toml.example
@ -84,7 +84,3 @@ sudo_delete=false
 # Whether /api/upload is enabled
 # It is not recommended to enable it if API key auth is not enabled
 upload=false
-
-# Whether curlapi is enabled
-# curl {url}/curlapi/help for more info
-curlapi=true
--- a/filed/dev-entry.sh
+++ b/filed/dev-entry.sh
@ -5,4 +5,4 @@ cd /opt/code
 cargo check
 cargo build

-cargo watch -w src -w templates/source -w static -x run
+cargo watch -w src -w templates -w static -x run
--- a/filed/src/config/types.rs
+++ b/filed/src/config/types.rs
@ -112,10 +112,6 @@ pub struct APISettings {
    /// Whether /api/upload is enabled
    #[serde(default)]
    pub upload: bool,
-
-    /// Whether curlapi is enabled
-    #[serde(default)]
-    pub curlapi: bool
 }

 impl Default for APISettings {
@ -127,8 +123,7 @@ impl Default for APISettings {
            get_all_own_only: true,
            delete: false,
            sudo_delete: false,
-            upload: false,
-            curlapi: true
+            upload: false
        }
    }
 }
--- a/filed/src/env.rs
+++ b/filed/src/env.rs
@ -15,23 +15,6 @@ pub struct Redis {
    pub prefix: String
 }

-#[derive(Debug, Clone)]
-pub struct VersionData {
-    pub commit: String,
-    pub short_commit: String,
-    pub branch: String
-}
-
-impl Default for VersionData {
-    fn default() -> Self {
-        VersionData {
-            commit: env!("COMMIT_HASH").to_string(),
-            short_commit: env!("COMMIT_HASH").to_string().chars().take(6).collect(),
-            branch: env!("COMMIT_BRANCH").to_string()
-        }
-    }
-}
-
 #[derive(Debug, Clone)]
 pub struct Env {
    pub logging: bool,
@ -41,8 +24,7 @@ pub struct Env {
    pub filedir: String,
    pub instanceurl: String,
    pub uploadspath: String,
-    pub confpath: String,
-    pub version: VersionData
+    pub confpath: String
 }

 fn get_var<T: Into<String>, O: From<String>>(name: T) -> Result<O, String> {
@ -158,8 +140,7 @@ pub fn loadenv() -> Result<Env, Box<dyn std::error::Error>> {
                    return Err(format!("CONF_FILE is {}, which is not a file!", spath).into())
                }
                spath
-            },
-            version: VersionData::default()
+            }
        }
    )
 }
--- a/filed/src/web/curlapi.rs
+++ b/filed/src/web/curlapi.rs
@ -1,11 +0,0 @@
-use warp::{Filter, reply::Reply, reject::Rejection};
-
-use super::state::SharedState;
-
-mod upload;
-mod help;
-
-pub fn get_routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
-    upload::get_routes(state.clone())
-        .or(help::get_routes(state))
-}
--- a/filed/src/web/curlapi/help.rs
+++ b/filed/src/web/curlapi/help.rs
@ -1,85 +0,0 @@
-use askama::Template;
-use warp::{Filter, reply::{Reply, html}, reject::Rejection};
-
-use crate::web::{state::SharedState, pages::CurlHelpPage, rejection::HttpReject};
-
-pub async fn help(state: SharedState, ua: String) -> Result<Box<dyn Reply>, Rejection> {
-
-    if ! ua.starts_with("curl/") {
-        let page = CurlHelpPage { conf: state.config.clone(), env: state.env.clone() };
-        return Ok(
-            Box::new(
-                html(page.render().map_err(|x| HttpReject::AskamaError(x))?)
-            )
-        )
-    }
-
-    let brand = format!(
-        "{} \x1b[1m{}\x1b[0m  {}",
-        state.config.brand.instance_emoji,
-        state.config.brand.instance_name,
-        {
-            if state.config.brand.instance_name != "blek! File" {
-                "\n\x1b[90mPowered by blek! File\x1b[0m"
-            } else { "" }
-        }
-    );
-
-    let mut warns: String = String::new();
-    if ! state.config.api.curlapi {
-        warns += "\x1b[1;31mWarning: curl API is disabled on this instance.\nYou can use the web UI to upload files.\x1b[0m\n\n"
-    }
-    if ! state.config.files.allow_uploads {
-        warns += {
-            format!(
-                "\x1b[1;31mWarning: all uploads are disabled on this instance{}\x1b[0m",
-                {
-                    if let Some(reason) = state.config.files.upload_disable_reason {
-                        format!(" for this reason:\n\"{}\"", reason)
-                    } else { ".".to_string() }
-                }
-            ).as_str()
-        }
-    }
-
-    let instance = state.env.instanceurl;
-    let help =
-format!(
-"To upload a new file, you can POST it like this:
-    \x1b[32mcurl\x1b[0m \x1b[33m-X POST\x1b[0m \x1b[34m{instance}/curlapi/upload\x1b[0m \x1b[33m-F'file=@file.txt'\x1b[0m \x1b[33m-F'tos_consent=on'\x1b[0m
-You can also add a password:
-    \x1b[32mcurl\x1b[0m \x1b[33m-X POST\x1b[0m \x1b[34m{instance}/curlapi/upload\x1b[0m \x1b[33m-F'file=@file.txt'\x1b[0m \x1b[33m-F'filename=uwu'\x1b[0m \x1b[33m-F'tos_consent=on'\x1b[0m \x1b[33m-F'named=on'\x1b[0m
-The `named=on` switch is neede because this API is basically
-the HTML used at the regular web UI form wrapped into this URL
-
-\x1b[1;32mIMPORTANT:\x1b[0m Read the terms of service \x1b[1mbefore\x1b[0m uploading the file!
-The ToS can be found here: \x1b[34m{instance}/tos\x1b[0m .
-
-{warns}"
-);
-
-    Ok(
-    Box::new(
-format!("
-  \x1b[31m┓ ╻\x1b[0m \x1b[35m┏┓•┓  \x1b[0m
-  \x1b[32m┣┓┃\x1b[0m \x1b[95m┣ ┓┃┏┓\x1b[0m
-  \x1b[34m┗┛•\x1b[0m \x1b[35m┻ ┗┗┗━\x1b[0m
-
-{brand}
-{help}
-").to_string())
-)   
-}
-
-pub fn get_routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
-    warp::any()
-        .and(warp::path!("curlapi" / "help"))
-        .and(
-            warp::any()
-                .map(move || state.clone())
-        )
-        .and(
-            warp::header::<String>("user-agent")
-        )
-        .and_then(help)
-}
--- a/filed/src/web/curlapi/upload.rs
+++ b/filed/src/web/curlapi/upload.rs
@ -1,139 +0,0 @@
-use std::net::IpAddr;
-
-use warp::{filters::multipart::FormData, reply::{Reply, with_status}, reject::Rejection, Filter};
-use warp_real_ip::real_ip;
-
-use crate::{web::{state::SharedState, forms::{FormElement, UploadFormData}, rejection::HttpReject}, files::File};
-
-pub async fn upload(form: FormData, ip: Option<IpAddr>, state: SharedState) -> Result<Box<dyn Reply>, Rejection> {
-    if ! state.config.files.allow_uploads {
-        return Ok(
-            Box::new(
-                with_status(
-                    match state.config.files.upload_disable_reason {
-                        Some(reason) => format!("Uploads are disabled for the following reason:\n{reason}"),
-                        None => "Uploads are disabled.".into()
-                    },
-                    warp::http::StatusCode::SERVICE_UNAVAILABLE
-                )
-            )
-        )
-    }
-
-    let params = FormElement::from_formdata(form)
-        .await
-        .map_err(|x| HttpReject::WarpError(x))?;
-
-    if let Some(consent) = params.get("tos_consent") {
-        if consent.data != "on".bytes().collect::<Vec<u8>>() {
-            return Ok(
-                Box::new(
-                    format!("You need to agree to the ToS to upload a file.\nSee {}/curlapi/help for details\n\nTo agree to the ToS, add a -F'tos_consent=on'\n", state.env.instanceurl)
-                )
-            )
-        }
-    } else {
-        return Ok(
-            Box::new(
-                format!("You need to agree to the ToS to upload a file.\nSee {}/curlapi/help for details\n\nTo agree to the ToS, add a -F'tos_consent=on'\n", state.env.instanceurl)
-            )
-        )
-    }
-
-    let formdata = UploadFormData::from_formdata(params, true);
-    if let Some(formdata) = formdata {
-
-        let mut breaks_conf = false;
-        if (!state.config.files.allow_custom_names) && formdata.filename.is_some() {
-            breaks_conf = true;
-        }
-        if (!state.config.files.allow_pass_protection) && formdata.password.is_some() {
-            breaks_conf = true;
-        }
-
-        if breaks_conf {
-            return Ok(
-                Box::new(
-                    with_status(
-                        "Attempt to set name or password when they are disabled".to_string(),
-                        warp::http::StatusCode::BAD_REQUEST
-                    )
-                )
-            );
-        }
-
-        if let Some(pass) = state.config.files.upload_pass {
-            let pass_valid: bool;
-            if let Some(upass) = formdata.instancepass {
-                pass_valid = upass == pass;
-            } else {
-                pass_valid = false
-            }
-
-            if ! pass_valid {
-                return Ok(
-                    Box::new(
-                        with_status(
-                            "Invalid instance password".to_string(),
-                            warp::http::StatusCode::BAD_REQUEST
-                        )
-                    )
-                );
-            }
-        }
-
-        let file = File::create(
-            formdata.file,
-            formdata.mime,
-            formdata.filename.clone(),
-            state.env.clone(),
-            formdata.delmode,
-            formdata.password,
-            ip
-        ).await.map_err(|x| HttpReject::StringError(x.to_string()))?;
-
-        state.file_mgr.save(&file, formdata.lookup_kind).map_err(|x| HttpReject::StringError(x.to_string()))?;
-
-        return Ok(
-            Box::new(
-                format!(
-                    concat!(
-                        "File uploaded successfully.\n",
-                        "It is available via this link:\n\n",
-
-                        "{}/upload/{}\n"
-                    ),
-                    state.env.instanceurl,
-                    urlencoding::encode(
-                        match formdata.filename {
-                            Some(name) => name,
-                            None => file.hash()
-                        }.as_str()
-                    )
-                )
-            )
-        );
-
-    } else {
-        Ok(
-            Box::new(
-                with_status(
-                    "Invalid form".to_string(),
-                    warp::http::StatusCode::BAD_REQUEST
-                )
-            )
-        )
-    }
-}
-
-pub fn get_routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
-    warp::post()
-        .and(warp::path!("curlapi" / "upload"))
-        .and(warp::multipart::form())
-        .and(real_ip(vec![state.env.proxy_addr]))
-        .and(
-            warp::any()
-                .map(move || state.clone())
-        )
-        .and_then(upload)
-}
--- a/filed/src/web/forms.rs
+++ b/filed/src/web/forms.rs
@ -17,9 +17,9 @@ use crate::files::{File, lookup::LookupKind, DeleteMode};
 use super::{state::SharedState, pages::{UploadSuccessPage, ErrorPage}, rejection::HttpReject};

 #[derive(Debug, Serialize, Clone)]
-pub struct FormElement {
-    pub data: Vec<u8>,
-    pub mime: String
+struct FormElement {
+    data: Vec<u8>,
+    mime: String
 }
 impl FormElement {
    
@ -58,15 +58,15 @@ impl FormElement {
    }
 }

-pub struct UploadFormData {
-    pub filename: Option<String>,
-    pub password: Option<String>,
-    pub instancepass: Option<String>,
-    pub lookup_kind: LookupKind,
-    pub delmode: DeleteMode,
-    pub file: Vec<u8>,
-    pub mime: String,
-    pub tos_consent: bool
+struct UploadFormData {
+    filename: Option<String>,
+    password: Option<String>,
+    instancepass: Option<String>,
+    lookup_kind: LookupKind,
+    delmode: DeleteMode,
+    file: Vec<u8>,
+    mime: String,
+    tos_consent: bool
 }

 impl Default for UploadFormData {
@ -86,7 +86,7 @@ impl Default for UploadFormData {

 impl UploadFormData {

-    pub fn from_formdata(data: HashMap<String, FormElement>, use_defaults: bool) -> Option<UploadFormData> {
+    pub fn from_formdata(data: HashMap<String, FormElement>) -> Option<UploadFormData> {
        let mut out = Self::default();
        
        // Add a name
@ -125,9 +125,7 @@ impl UploadFormData {
                }
            },
            None => {
-                if ! use_defaults {
-                    return None
-                }
+                return None
            }
        }

@ -171,7 +169,7 @@ pub async fn upload(form: FormData, ip: Option<IpAddr>, state: SharedState) -> R
    }

    let params: HashMap<String, FormElement> = FormElement::from_formdata(form).await.map_err(|x| HttpReject::WarpError(x))?;
-    let formdata = UploadFormData::from_formdata(params.clone(), false);
+    let formdata = UploadFormData::from_formdata(params.clone());

    if let Some(formdata) = formdata {

--- a/filed/src/web/mod.rs
+++ b/filed/src/web/mod.rs
@ -2,28 +2,32 @@
 web - The part of filed that handles everything related to HTTP
 */

+use std::env::current_dir;
+
 use static_dir::static_dir;
 use warp::{Filter, reply::Reply, reject::Rejection};

 use crate::{env::Env, files::lookup::FileManager, config::types::Config};

 mod pages;
-pub mod forms;
+mod forms;
 pub mod state;
 mod rejection;
 mod api;
 mod uploaded;
-mod curlapi;

 use state::SharedState;

 pub fn routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
-    static_dir!("static")
-        .or(curlapi::get_routes(state.clone()))
-        .or(pages::get_routes(state.clone()))
+    let staticpath = current_dir().unwrap();
+    let staticpath = staticpath.to_str().unwrap().to_string() + "/static";
+
+    pages::get_routes(state.clone())
        .or(forms::get_routes(state.clone()))
        .or(api::get_routes(state.clone()))
        .or(uploaded::get_uploaded(state))
+        .or(static_dir!("static"))
+        .or(warp::fs::dir(staticpath.to_string()))
 }

 /*
--- a/filed/src/web/pages.rs
+++ b/filed/src/web/pages.rs
@ -88,14 +88,6 @@ pub struct ErrorPage {
    pub link_text: Option<String>
 }

-#[derive(Template)]
-#[template( path = "curlapi_help.html" )]
-#[allow(dead_code)]
-pub struct CurlHelpPage {
-    pub env: Env,
-    pub conf: Config
-}
-
 pub async fn uploaded(query: HashMap<String, String>, state: SharedState) -> Result<Html<String>, Rejection> {

    if ! query.contains_key("file") {
--- a/filed/static/assets/alert.css
+++ b/filed/static/assets/alert.css
@ -25,6 +25,3 @@
 .alert.blue .alert-title {
    background: #203050;
 }
-.alert.green .alert-title {
-    background: #205030;
-}
--- a/filed/static/assets/code.css
+++ b/filed/static/assets/code.css
@ -1,23 +0,0 @@
-.code {
-    display: block;
-    padding: 1em;
-    border: 1px solid var(--header-sec-color);
-    border-radius: 12px;
-    overflow-x: auto;
-}
-.code .inner {
-    width: max-content;
-    display: block;
-}
-.code-inline {
-    display: inline;
-    background: #00000010;
-    border: 1px solid #c2c4c210;
-    border-radius: 4px;
-    padding: 2px 4px;
-}
-
-.code, .code-inline {
-    font-family: monospace;
-    line-height: 1.5em;
-}
--- a/filed/static/assets/dragndrop-form.js
+++ b/filed/static/assets/dragndrop-form.js
@ -6,27 +6,6 @@

        /** @type {HTMLElement} */
        const root_drag_rop = document.getElementsByClassName('file-drag-n-drop')[0];
-
-        // make the root drag&drop element an ideal circle
-
-        function updateDragNDrop() {
-            
-            if (document.body.scrollWidth < 667) {
-                // mobile
-                delete root_drag_rop.style.width;
-                delete root_drag_rop.style.height;
-                return
-            }
-
-            const width = root_drag_rop.offsetWidth;
-
-            root_drag_rop.style.width   = width + 'px';
-            root_drag_rop.style.height  = width + 'px';
-        }
-
-        updateDragNDrop();
-        document.onresize = updateDragNDrop();
-
        /** @type {HTMLElement} */
        const drag_rop = document.getElementsByClassName('file-drag-n-drop-inside')[0];
        const dr_rop_t = document.getElementsByClassName('file-drag-n-drop-inside-text')[0];
--- a/filed/static/assets/upload_form.css
+++ b/filed/static/assets/upload_form.css
@ -1,7 +1,7 @@
 .file-drag-n-drop {
    display: block;
    cursor: pointer;
-    width: 100%;
+    width: 440px;
    height: 440px;
    background: var(--header-sec-color);
    border-radius: 16px;
--- a/filed/templates/.gitignore
+++ b/filed/templates/.gitignore
@ -1,2 +0,0 @@
-*
-!.gitignore
--- a/filed/templates/source/authors.html
+++ b/filed/templates/source/authors.html
--- a/filed/templates/source/bad_action_req.html
+++ b/filed/templates/source/bad_action_req.html
--- a/filed/templates/source/base.html
+++ b/filed/templates/source/base.html
@ -16,22 +16,6 @@
        <title>{{ conf.brand.instance_name }}</title>

        <style> .footer svg { height: 32px; margin: 10px 0 } </style>
-        <style>
-        .header .header-text, .header .header-home, .header .header-bg { transition: 250ms ease; }
-        @media (max-width:667px) {
-
-            .header .header-text { text-align: center }
-            .header .header-home { width: 100% }
-            .header .header-bg   { left: 50% !important; transform: translateX(-50%); -webkit-mask-image: linear-gradient(90deg, #0000, #000, #0000); }
-
-            {%- if conf.brand.instance_motto.len() != 0 -%}
-                .header .header-home-motto {
-                    display:none
-                }
-            {%- endif -%}
-
-        }
-        </style>

        {%- if cfg!(debug_assertions) -%}
            <link rel="stylesheet" href="/alert.css" />
@ -49,7 +33,7 @@
                    {{- conf.brand.instance_name -}}
                    {%- if conf.brand.instance_motto.len() != 0 -%}
                        {#- Whitespace control is stupid -#}
-                        <span class="header-home-motto">{{- " - " -}}{{- conf.brand.instance_motto -}}</span>
+                        {{- " - " -}}{{- conf.brand.instance_motto -}}
                    {%- endif -%}
                </a>
            </div>
@ -83,13 +67,6 @@
                            <td>
                                <small>Made with Rust and &lt;3</small>
                    
-                                <small style="display:block">
-                                    Version
-                                    <a href="https://git.blek.codes/blek/bfile/commit/{{ env.version.commit }}" target="_blank">
-                                        {{ env!("CARGO_PKG_VERSION") }} ({{ env.version.branch -}}/{{- env.version.short_commit }})
-                                    </a>
-                                </small>
-                    
                                <ul style='margin:10px 0'>
                                    <li>
                                        <a href="https://git.blek.codes/blek/bfile">
--- a/filed/templates/source/error.html
+++ b/filed/templates/source/error.html
--- a/filed/templates/source/index.html
+++ b/filed/templates/source/index.html
--- a/filed/templates/source/license.html
+++ b/filed/templates/source/license.html
--- a/filed/templates/source/passworded-files.html
+++ b/filed/templates/source/passworded-files.html
--- a/filed/templates/source/seotags.html
+++ b/filed/templates/source/seotags.html
--- a/filed/templates/source/blek.svg
+++ b/filed/templates/source/blek.svg
@ -1 +0,0 @@
-<svg xmlns='http://www.w3.org/2000/svg' fill='currentColor' viewBox='0 0 217.2 80.2'><path stroke-linecap='round' stroke-width='.94' d='M167.5 78.8h-30.6v-1h.1a9.56 9.56 0 0 0 2.6-.34 7.21 7.21 0 0 0 3.2-1.86 7.38 7.38 0 0 0 2.08-4.19 10.34 10.34 0 0 0 .12-1.61v-57a9.37 9.37 0 0 0-.34-2.6 7.18 7.18 0 0 0-1.91-3.2 7.62 7.62 0 0 0-4.42-2.1 10.54 10.54 0 0 0-1.43-.1v-1h10.2q4.71 0 7.38-.94a9.48 9.48 0 0 0 .42-.16q1.74-.77 2.75-1.77a5.19 5.19 0 0 0 .75-.93h1v52.6l17-14.3a28.74 28.74 0 0 0 1.94-1.76q1.86-1.85 2.62-3.47a6.17 6.17 0 0 0 .34-.87 5.92 5.92 0 0 0 .09-.43q.3-1.9-1.08-2.38a2.57 2.57 0 0 0-.31-.09l-1.3-.3v-1h14.9v1l-1 .2a11.7 11.7 0 0 0-2.6.76q-1.12.47-2.28 1.2a19.22 19.22 0 0 0-.07.04q-1.94 1.22-5.2 3.84a159.62 159.62 0 0 0-2.15 1.76l-6.9 5.8 19.9 30.6a33.2 33.2 0 0 0 1.08 1.36q1.06 1.24 1.93 1.97a7.93 7.93 0 0 0 .29.22q1.4 1.05 3.1 1.05v1h-26.4v-1q2.27 0 3.13-.33a1.76 1.76 0 0 0 .17-.07q.74-.25.87-.97a1.86 1.86 0 0 0 .03-.33q0-.81-.57-2.04a11.36 11.36 0 0 0-.13-.26 85.38 85.38 0 0 0-.32-.63l-.3-.59a148.04 148.04 0 0 0-.33-.63 31.93 31.93 0 0 0-.53-.97l-.6-1.02a54.25 54.25 0 0 0-.22-.36l-11.4-18.3-3.7 3.2v15.3a9.56 9.56 0 0 0 .34 2.6 7.21 7.21 0 0 0 1.86 3.2 7.38 7.38 0 0 0 4.19 2.08 10.34 10.34 0 0 0 1.61.12h.1v1ZM9.1 80.2h-1V12.8a9.37 9.37 0 0 0-.34-2.6A7.18 7.18 0 0 0 5.85 7a7.62 7.62 0 0 0-4.42-2.1A10.54 10.54 0 0 0 0 4.8v-1h10.2a49.91 49.91 0 0 0 2.64-.06q3.77-.2 5.44-1.03a4.6 4.6 0 0 0 .02-.01 10.17 10.17 0 0 0 1.48-.9q.81-.6 1.37-1.3a5.73 5.73 0 0 0 .35-.5h1v36.4q2.3-4.5 6.45-7.2t9.15-2.7q5.9 0 10.5 3.5a22.42 22.42 0 0 1 5.7 6.49 28.24 28.24 0 0 1 1.55 3.01q2.65 6 2.65 13.7a36.88 36.88 0 0 1-.7 7.3 28.48 28.48 0 0 1-2.25 6.8q-2.95 6.1-8.25 9.5a21.45 21.45 0 0 1-9.17 3.21 27.24 27.24 0 0 1-3.23.19 21.87 21.87 0 0 1-6.22-.83 14.8 14.8 0 0 1-9.78-9.07l-9.8 9.9Zm128-34.4.1 1.5h-33.6v.5a38.84 38.84 0 0 0 .58 6.93q.7 3.87 2.26 6.98a20.6 20.6 0 0 0 1.86 3.04 15.79 15.79 0 0 0 4.92 4.45q3.36 1.9 7.68 1.9 4.8 0 9.15-2.35 4.35-2.35 7.05-6.35l.9.3q-1.7 5.1-5.3 9-3.6 3.9-8.5 6.1a25.45 25.45 0 0 1-10.07 2.2 29.25 29.25 0 0 1-.53 0q-6.9 0-12.25-3.4a22.86 22.86 0 0 1-7.97-8.7 27.29 27.29 0 0 1-.38-.75 28.67 28.67 0 0 1-2.7-9.03 36.6 36.6 0 0 1-.3-4.82 32.79 32.79 0 0 1 .77-7.28 25.67 25.67 0 0 1 2.53-6.72q3.3-6 9.05-9.35 5.75-3.35 13.05-3.35a26.46 26.46 0 0 1 6.02.66 21.48 21.48 0 0 1 4.83 1.74q4.75 2.4 7.6 6.75a20.08 20.08 0 0 1 3.04 8.13 24.45 24.45 0 0 1 .21 1.92Zm-47.2 33H59.3v-1a9.82 9.82 0 0 0 2.65-.34 7.46 7.46 0 0 0 3.2-1.81 7.12 7.12 0 0 0 2.08-3.94 10.33 10.33 0 0 0 .17-1.91v-57a9.37 9.37 0 0 0-.34-2.6A7.18 7.18 0 0 0 65.15 7a7.62 7.62 0 0 0-4.42-2.1 10.54 10.54 0 0 0-1.43-.1v-1h10.2q4.71 0 7.38-.94a9.48 9.48 0 0 0 .42-.16q1.74-.77 2.75-1.77A5.19 5.19 0 0 0 80.8 0h1v69.8q0 3.7 2.25 5.85 2.25 2.15 5.85 2.15v1ZM22.5 39.9V65a27.97 27.97 0 0 0 .52 3.96q.74 3.5 2.38 5.89 2.5 3.65 6.6 3.65 4.95 0 7.63-5.75a19.3 19.3 0 0 0 .37-.85 28.56 28.56 0 0 0 1.42-4.73Q42.7 61.3 42.7 52.5a97.73 97.73 0 0 0-.13-5.24q-.3-5.58-1.29-9.26a20.42 20.42 0 0 0-.68-2.1q-1.23-3.15-3.27-4.46A6.03 6.03 0 0 0 34 30.5a9.9 9.9 0 0 0-6.95 2.81 12.76 12.76 0 0 0-.1.09 18.73 18.73 0 0 0-3.3 4.1 16.72 16.72 0 0 0-1.15 2.4Zm186.6 11.8h-1a115.54 115.54 0 0 0-.18-6.57q-.29-5.13-1.07-9.13a148.1 148.1 0 0 0-.96-4.55q-.5-2.23-1.04-4.2a78.12 78.12 0 0 0-.65-2.25 142.68 142.68 0 0 0-1.2-3.63q-.58-1.64-1.13-3.08a78.3 78.3 0 0 0-.37-.94 18.06 18.06 0 0 1-1.17-4.4 15.99 15.99 0 0 1-.13-2.05 10.23 10.23 0 0 1 .35-2.75 7.75 7.75 0 0 1 1.95-3.4 7.7 7.7 0 0 1 4.48-2.23 10.83 10.83 0 0 1 1.62-.12 10.48 10.48 0 0 1 2.76.34 7.7 7.7 0 0 1 3.49 2.01 7.91 7.91 0 0 1 2.25 4.67 11 11 0 0 1 .1 1.48 17.47 17.47 0 0 1-.87 5.38 20.4 20.4 0 0 1-.38 1.07q-.86 2.23-1.84 5.01a284.93 284.93 0 0 0-.91 2.64q-1.6 4.6-2.85 11a59.41 59.41 0 0 0-.76 5.2q-.49 4.69-.49 10.5Zm-105.4-5.9H124q0-7.9-2.55-12.8a11.57 11.57 0 0 0-1.65-2.42 7.12 7.12 0 0 0-5.5-2.48 7.41 7.41 0 0 0-5.34 2.27q-.99.97-1.85 2.34a16.41 16.41 0 0 0-.11.19 19.79 19.79 0 0 0-1.94 4.45q-.69 2.22-1.04 4.87a43.13 43.13 0 0 0-.32 3.58Zm98.88 31.98a8.17 8.17 0 0 0 5.92 2.42 9.73 9.73 0 0 0 .1 0 8.18 8.18 0 0 0 5.9-2.5 10.03 10.03 0 0 0 .08-.08A8.17 8.17 0 0 0 217 71.7a10.28 10.28 0 0 0 0-.34 7.88 7.88 0 0 0-2.6-5.76 10.87 10.87 0 0 0-.33-.3 8.38 8.38 0 0 0-5.57-2.1 8.2 8.2 0 0 0-3.22.64 9.25 9.25 0 0 0-2.68 1.76 7.87 7.87 0 0 0-2.03 2.92 8.6 8.6 0 0 0-.57 3.18 9.73 9.73 0 0 0 0 .1 8.18 8.18 0 0 0 2.5 5.9 10.03 10.03 0 0 0 .08.08Z' font-size='12' vector-effect='non-scaling-stroke'/></svg>
--- a/filed/templates/source/curlapi_help.html
+++ b/filed/templates/source/curlapi_help.html
@ -1,113 +0,0 @@
-
-{% extends "base.html" %}
-
-{% block head %}
-<link rel='stylesheet' href="/code.css" />
-<link rel='stylesheet' href="/alert.css" />
-<link rel='stylesheet' href="/js-only.css" />
-<style>
-.copy-btn { font-size: 70%; transform: translateY(-25%); display: inline-block }
-</style>
-{% endblock %}
-
-{% block body %}
-
-<div style="max-width:95vw;width:fit-content;margin:0 auto">
-    <h1 style="text-align:center">Curl API</h1>
-    <p>
-        blek! File has an API for uploading files via cURL.
-        To upload a file via cURL, follow these instructions:
-    </p>
-    <p>
-        To upload a file, POST it like this:
-        <a href="#" class="copy-btn" data-clipboard-text="curl -X POST {{env.instanceurl}}/curlapi/upload -F'file=@file.txt' -F'tos_consent=on'">
-            Copy!
-        </a>
-    </p>
-    <div class='code'>
-        <span class='inner'>
-            <span style='color:green'>curl</span>
-            <span style='color:orange'>-X POST</span>
-            <span style='color:darkcyan'>{{env.instanceurl}}/curlapi/upload</span>
-            <span style='color:orange'>-F'file=@file.txt'</span>
-            <span style='color:orange'>-F'tos_consent=on'</span>
-        </span>
-    </div>
-    <p>
-        To add a password, do it like this:
-        <a href="#" class="copy-btn" data-clipboard-text="curl -X POST {{env.instanceurl}}/curlapi/upload -F'file=@file.txt' -F'filename=uwu' -F'tos_consent=on' -F'named=on'">
-            Copy!
-        </a>
-    </p>
-    <div class='code'>
-        <span class='inner'>
-            <span style='color:green'>curl</span>
-            <span style='color:orange'>-X POST</span>
-            <span style='color:darkcyan'>{{env.instanceurl}}/curlapi/upload</span>
-            <span style='color:orange'>-F'file=@file.txt'</span>
-            <span style='color:orange'>-F'tos_consent=on'</span>
-            <span style='color:orange'>-F'named=on'</span>
-        </span>
-    </div>
-    <p>
-        Note that the
-        <span class='code-inline'>named=on</span>
-        switch is required.
-        Its needed because the curl API is basically a wrapper of
-        <a href="/">this</a>
-        HTML form.
-    </p>
-    
-    <div class="alert green">
-        <h1 class="alert-title">
-            Important
-        </h1>
-        <p class="alert-text">
-            Read the
-            <a href="/tos">Terms of Service</a>
-            <b>before</b>
-            uploading a file.
-            <br/>
-            You agree to them by adding the
-            <span class="code-inline">tos_consent=on</span>
-            switch.
-        </p>
-    </div>
-
-    <div class='alert blue'>
-        <h1 class='alert-title'>Web UI</h1>
-        <div class='alert-text'>
-            <p>
-                Hey, it looks like you are viewing this page from a browser!<br/>
-                You can use the Web UI as well to upload a file!
-            </p>
-            <p style='margin:32px 0'>
-                <a href='/' role='button' class='btn'>
-                    Go to the web UI
-                </a>
-            </p>
-        </div>
-    </div>
-</div>
-
-{% endblock %}
-
-{% block scripts %}
-<script src="https://unpkg.com/clipboard@2/dist/clipboard.min.js"></script>
-<script>
-    new ClipboardJS('.copy-btn');
-    (
-        () => {
-            let btns = document.getElementsByClassName('copy-btn')
-            for (const button of btns) {
-                button.onclick = () => {
-                    let old = button.innerHTML;
-                    button.innerHTML = 'Copied!';
-                    setTimeout(() => { button.innerHTML = old }, 500);
-                }
-            }
-        }
-    )()
-</script>
-<script src='/js-only.js'></script>
-{% endblock %}
--- a/filed/templates/source/tos.html
+++ b/filed/templates/source/tos.html
--- a/filed/templates/source/upload_success.html
+++ b/filed/templates/source/upload_success.html
--- a/filed/templates/source/uploaded.html
+++ b/filed/templates/source/uploaded.html
--- a/janitor/.env.example
+++ b/janitor/.env.example
@ -5,5 +5,5 @@ REDIS_PREFIX=bfile-

 USERCONTENT_DIR=/opt/user_uploads

-CLEAN_DEL=30min
-CLEAN_ERRDEL=2min
+CLEAN_DEL=30 minutes
+CLEAN_ERRDEL=2 minutes
--- a/janitor/Dockerfile.prod
+++ b/janitor/Dockerfile.prod
@ -10,7 +10,7 @@ RUN cargo b -r
 RUN strip target/release/janitor && upx --best target/release/janitor

 # --- deploy ---
-FROM alpine:3.17
+FROM busybox:musl

 RUN mkdir /config
 WORKDIR /config
--- a/resource/.air.toml
+++ b/resource/.air.toml
@ -1,46 +0,0 @@
-root = "."
-testdata_dir = "testdata"
-tmp_dir = "tmp"
-
-[build]
-  args_bin = []
-  bin = "./tmp/main"
-  cmd = "go build -o ./tmp/main ."
-  delay = 1000
-  exclude_dir = ["assets", "tmp", "vendor", "testdata"]
-  exclude_file = []
-  exclude_regex = [ ".*\\.md" ]
-  exclude_unchanged = false
-  follow_symlink = false
-  full_bin = ""
-  include_dir = []
-  include_ext = ["go", "tpl", "tmpl", "html"]
-  include_file = []
-  kill_delay = "0s"
-  log = "build-errors.log"
-  poll = false
-  poll_interval = 0
-  post_cmd = []
-  pre_cmd = []
-  rerun = false
-  rerun_delay = 500
-  send_interrupt = false
-  stop_on_error = false
-
-[color]
-  app = ""
-  build = "yellow"
-  main = "magenta"
-  runner = "green"
-  watcher = "cyan"
-
-[log]
-  main_only = false
-  time = false
-
-[misc]
-  clean_on_exit = false
-
-[screen]
-  clear_on_rebuild = false
-  keep_scroll = true
--- a/resource/.gitignore
+++ b/resource/.gitignore
@ -1,5 +0,0 @@
-resourced.toml
-resourced
-.DS_Store
-.env
-tmp
--- a/resource/Dockerfile.prod
+++ b/resource/Dockerfile.prod
@ -1,22 +0,0 @@
-FROM golang:alpine3.17 as builder
-
-WORKDIR /opt/build
-COPY . .
-
-RUN apk add --no-cache git musl-dev upx binutils
-
-RUN go build . && \
-    strip resourced && \
-    upx   resourced
-
-FROM alpine:3.17
-
-WORKDIR /opt/code
-COPY --from=builder /opt/build/resourced /usr/bin/resourced
-
-# Note
-# -----
-# Since this is running with prefork, don't
-# forget to set --pid=host when running this app
-
-CMD [ "sh", "-c", "/usr/bin/resourced" ]
--- a/resource/README.md
+++ b/resource/README.md
@ -1,15 +0,0 @@
-# resourceD
-A simple microservice for serving resources
-
-## Building
-```sh
-go build .
-```
-
-## Running
-Either run it the normal way via the provided docker compose file, or `go run .`.
-
-Also dont forget to create `resourced.toml`
-
-## Configuration
-The file `resourced.toml.example` serves as a both an example and reference, since it has a lot of comments.
--- a/resource/api_ref.swagger.yml
+++ b/resource/api_ref.swagger.yml
@ -1,93 +0,0 @@
-openapi: 3.0.3
-info:
-  title: ResourceD API
-  description: |-
-    This is the ResourceD API docs.
-  license:
-    name: GPLv3
-    url: https://www.gnu.org/licenses/gpl-3.0.en.html
-  version: "1.0"
-servers:
-  - url: http://localhost/resource
-tags:
-  - name: Data API
-    description: API for serving data
-  - name: System API
-    description: API for serving system data
-  - name: Internal API
-    description: API for microservices. Shouldn't be accessible via WAN
-
-paths:
-  /{id}:
-    get:
-      description: Get a resource
-      summary: Get a resource. Send browser requests to this URL
-      tags:
-        - Data API
-      responses:
-        200:
-          description: Returns a resource in its binary data
-        302:
-          description: Resource is an external (http) link and the redirect is being forwarded to that link
-        404:
-          description: Not found
-        500:
-          description: Internal error
-  /info/is_enabled:
-    get:
-      description: Check if resourceD is enabled
-      summary: Check if resourceD is enabled
-      tags:
-        - System API
-      responses:
-        200:
-          description: Ok
-          content:
-            application/json:
-              schema:
-                type: boolean
-                example: true
-  /internal/check_resource:
-    post:
-      summary: Check if a resource(s) exist
-      description: |-
-        This method takes an array of resources and reports which ones exist.
-
-        See responses for more info.
-      tags:
-        - Internal API
-      requestBody:
-        description: |-
-          An array of strings, where each string is a resource ID
-
-          Let's assume that we want to check if two resources exist: `dev.blek.file.logo` and `org.nonexistant.resource`.
-        content:
-          application/json:
-            schema:
-              type: array
-              items:
-                type: string
-            example:
-              - dev.blek.file.logo
-              - org.nonexistant.resource
-      responses:
-        200:
-          description: |-
-            As in the request body example, let's assume that this method checked if these two resources exist:
-             - `dev.blek.file.logo`
-             - `org.nonexistant.resource`
-            
-            As we can see, this returned only `dev.blek.file.logo` because its the only resource of the provided ones that exist.
-          content:
-            application/json:
-              schema:
-                type: object
-                additionalProperties:
-                  type: object
-                  properties:
-                    type:
-                      type: string
-                    
-                example:
-                  dev.blek.file.logo:
-                    type: image/png
--- a/resource/go.mod
+++ b/resource/go.mod
@ -1,20 +0,0 @@
-module blek/resourced
-
-go 1.21.3
-
-require (
-	github.com/BurntSushi/toml v1.3.2 // indirect
-	github.com/andybalholm/brotli v1.0.5 // indirect
-	github.com/dustin/go-humanize v1.0.1 // indirect
-	github.com/gofiber/fiber/v2 v2.50.0 // indirect
-	github.com/google/uuid v1.3.1 // indirect
-	github.com/klauspost/compress v1.16.7 // indirect
-	github.com/mattn/go-colorable v0.1.13 // indirect
-	github.com/mattn/go-isatty v0.0.19 // indirect
-	github.com/mattn/go-runewidth v0.0.15 // indirect
-	github.com/rivo/uniseg v0.2.0 // indirect
-	github.com/valyala/bytebufferpool v1.0.0 // indirect
-	github.com/valyala/fasthttp v1.50.0 // indirect
-	github.com/valyala/tcplisten v1.0.0 // indirect
-	golang.org/x/sys v0.13.0 // indirect
-)
--- a/resource/go.sum
+++ b/resource/go.sum
@ -1,31 +0,0 @@
-github.com/BurntSushi/toml v1.3.2 h1:o7IhLm0Msx3BaB+n3Ag7L8EVlByGnpq14C4YWiu/gL8=
-github.com/BurntSushi/toml v1.3.2/go.mod h1:CxXYINrC8qIiEnFrOxCa7Jy5BFHlXnUU2pbicEuybxQ=
-github.com/andybalholm/brotli v1.0.5 h1:8uQZIdzKmjc/iuPu7O2ioW48L81FgatrcpfFmiq/cCs=
-github.com/andybalholm/brotli v1.0.5/go.mod h1:fO7iG3H7G2nSZ7m0zPUDn85XEX2GTukHGRSepvi9Eig=
-github.com/dustin/go-humanize v1.0.1 h1:GzkhY7T5VNhEkwH0PVJgjz+fX1rhBrR7pRT3mDkpeCY=
-github.com/dustin/go-humanize v1.0.1/go.mod h1:Mu1zIs6XwVuF/gI1OepvI0qD18qycQx+mFykh5fBlto=
-github.com/gofiber/fiber/v2 v2.50.0 h1:ia0JaB+uw3GpNSCR5nvC5dsaxXjRU5OEu36aytx+zGw=
-github.com/gofiber/fiber/v2 v2.50.0/go.mod h1:21eytvay9Is7S6z+OgPi7c7n4++tnClWmhpimVHMimw=
-github.com/google/uuid v1.3.1 h1:KjJaJ9iWZ3jOFZIf1Lqf4laDRCasjl0BCmnEGxkdLb4=
-github.com/google/uuid v1.3.1/go.mod h1:TIyPZe4MgqvfeYDBFedMoGGpEw/LqOeaOT+nhxU+yHo=
-github.com/klauspost/compress v1.16.7 h1:2mk3MPGNzKyxErAw8YaohYh69+pa4sIQSC0fPGCFR9I=
-github.com/klauspost/compress v1.16.7/go.mod h1:ntbaceVETuRiXiv4DpjP66DpAtAGkEQskQzEyD//IeE=
-github.com/mattn/go-colorable v0.1.13 h1:fFA4WZxdEF4tXPZVKMLwD8oUnCTTo08duU7wxecdEvA=
-github.com/mattn/go-colorable v0.1.13/go.mod h1:7S9/ev0klgBDR4GtXTXX8a3vIGJpMovkB8vQcUbaXHg=
-github.com/mattn/go-isatty v0.0.16/go.mod h1:kYGgaQfpe5nmfYZH+SKPsOc2e4SrIfOl2e/yFXSvRLM=
-github.com/mattn/go-isatty v0.0.19 h1:JITubQf0MOLdlGRuRq+jtsDlekdYPia9ZFsB8h/APPA=
-github.com/mattn/go-isatty v0.0.19/go.mod h1:W+V8PltTTMOvKvAeJH7IuucS94S2C6jfK/D7dTCTo3Y=
-github.com/mattn/go-runewidth v0.0.15 h1:UNAjwbU9l54TA3KzvqLGxwWjHmMgBUVhBiTjelZgg3U=
-github.com/mattn/go-runewidth v0.0.15/go.mod h1:Jdepj2loyihRzMpdS35Xk/zdY8IAYHsh153qUoGf23w=
-github.com/rivo/uniseg v0.2.0 h1:S1pD9weZBuJdFmowNwbpi7BJ8TNftyUImj/0WQi72jY=
-github.com/rivo/uniseg v0.2.0/go.mod h1:J6wj4VEh+S6ZtnVlnTBMWIodfgj8LQOQFoIToxlJtxc=
-github.com/valyala/bytebufferpool v1.0.0 h1:GqA5TC/0021Y/b9FG4Oi9Mr3q7XYx6KllzawFIhcdPw=
-github.com/valyala/bytebufferpool v1.0.0/go.mod h1:6bBcMArwyJ5K/AmCkWv1jt77kVWyCJ6HpOuEn7z0Csc=
-github.com/valyala/fasthttp v1.50.0 h1:H7fweIlBm0rXLs2q0XbalvJ6r0CUPFWK3/bB4N13e9M=
-github.com/valyala/fasthttp v1.50.0/go.mod h1:k2zXd82h/7UZc3VOdJ2WaUqt1uZ/XpXAfE9i+HBC3lA=
-github.com/valyala/tcplisten v1.0.0 h1:rBHj/Xf+E1tRGZyWIWwJDiRY0zc1Js+CV5DqwacVSA8=
-github.com/valyala/tcplisten v1.0.0/go.mod h1:T0xQ8SeCZGxckz9qRXTfG43PvQ/mcWh7FwZEA7Ioqkc=
-golang.org/x/sys v0.0.0-20220811171246-fbc7d0a398ab/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.6.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
-golang.org/x/sys v0.13.0 h1:Af8nKPmuFypiUBjVoU9V20FiaFXOcuZI21p0ycVYYGE=
-golang.org/x/sys v0.13.0/go.mod h1:oPkhp1MJrh7nUepCBck5+mAzfO9JrbApNNgaTdGDITg=
--- a/resource/main.go
+++ b/resource/main.go
@ -1,190 +0,0 @@
-package main
-
-import (
-	"log"
-	"fmt"
-	"regexp"
-	"strings"
-	"net/http"
-	"io/ioutil"
-	"encoding/json"
-)
-
-import (
-	"github.com/BurntSushi/toml"
-	"github.com/gofiber/fiber/v2"
-	"github.com/dustin/go-humanize"
-)
-
-type Resource struct {
-	Url		string 	`toml:"url"`
-	Proxied	bool	`toml:"proxied",default:false`
-	Mime	string 	`toml:"mime"`
-}
-type CheckResourceType struct {
-	Type 	string	`json:"type"`
-}
-func (self Resource) Get() ([]byte, error) {
-	return ioutil.ReadFile(self.Url[7:])
-}
-
-type ResourceDConfig struct {
-	Enabled				bool 	`toml:"enabled"`
-	ListenURL			string 	`toml:"listen_url"`
-	ProxyCacheMinSize	string	`toml:"proxy_cache_min_size",default:5MB`
-}
-
-type Config struct {
-	ResourceD 	ResourceDConfig `toml:"resourceD"`
-	Resource map[string]Resource `toml:"resource"`
-}
-
-func (self Config) Validate() int {
-	re, err := regexp.Compile(`^(file|http(s|))://`)
-	if err != nil { panic(err) }
-
-	for key, res := range self.Resource {
-		if ! re.MatchString(res.Url) {
-			panic(fmt.Sprintf("Resource %s has invalid URL: %s\nOnly file://, http:// and https:// URLs are allowed", key, res.Url))
-		}
-	}
-
-	return 0
-}
-func (self Resource) GetProxied() ([]byte, error) {
-
-	cached, exists := ProxyResourceCache[self.Url];
-	if exists {
-		return cached, nil
-	}
-
-	resp, err := http.Get(self.Url)
-	if err != nil { return make([]byte, 0, 0), err }
-
-	buf, err := ioutil.ReadAll(resp.Body)
-	if err != nil { return make([]byte, 0, 0), err }
-
-	// cache only those that are less than 5 mb
-	if len(buf) > ProxyCacheMinSize {
-		ProxyResourceCache[self.Url] = buf
-	}
-	
-	return buf, nil
-}
-
-var ProxyResourceCache map[string][]byte = make(map[string][]byte)
-var ProxyCacheMinSize int
-
-func main() {
-	var conf Config
-	
-	data, err := ioutil.ReadFile("resourced.toml")
-	if err != nil { panic(err) }
-
-	a, err := toml.Decode(string(data), &conf)
-	if err != nil { panic(err) }
-	_ = a
-
-	cache_min, err := humanize.ParseBytes(conf.ResourceD.ProxyCacheMinSize)
-	if err != nil { panic(err) }
-	ProxyCacheMinSize = int(cache_min)
-
-	conf.Validate()
-
-	if len(conf.Resource) == 0 {
-		fmt.Println("\x1b[33m[warn] No resources are specified\x1b[0m");
-	} else {
-		fmt.Println(fmt.Sprintf("[info] Loaded %d resources", len(conf.Resource)))
-	}
-
-	if ! conf.ResourceD.Enabled {
-		fmt.Println("\x1b[33m[warn] resourceD is disabled. No resources will be served\x1b[0m")
-	}
-	
-	app := fiber.New(fiber.Config {
-		Prefork:		true,
-		CaseSensitive:	false,
-		StrictRouting:	true,
-		ServerHeader:	"",
-		AppName:		"blek! File resourceD",
-	})
-
-	app.Get("/info/is_enabled", func (c *fiber.Ctx) error {
-		return c.JSON(conf.ResourceD.Enabled)
-	})
-
-	app.Use(func (c *fiber.Ctx) error {
-		if ! conf.ResourceD.Enabled {
-			return c.Status(fiber.StatusNotFound).SendString("ResourceD is disabled")
-		}
-		return c.Next()
-	})
-	app.Post("/internal/check_resource", func (c *fiber.Ctx) error {
-
-		resources := new([]string)
-		err := json.Unmarshal(c.Body(), &resources)
-
-		if err != nil {
-			log.Fatalln(err)
-			return c.Send([]byte("{ \"error\": \"500\"}"))
-		}
-
-		resources_exist := make(map[string]CheckResourceType)
-
-		for _, resource := range *resources {
-			if val, ok := conf.Resource[resource]; ok {
-				resources_exist[resource] = CheckResourceType {
-					Type: val.Mime,
-				}
-			}
-		}
-
-		marshaled, err := json.Marshal(resources_exist)
-		if err != nil {
-			log.Fatalln(err)
-			return c.Send([]byte("{ \"error\": \"500\"}"))
-		}
-
-		return c.Send([]byte(marshaled))
-	})
-
-	app.Get("/:id", func (c *fiber.Ctx) error {
-		res, exists := conf.Resource[c.Params("id")]
-		if ! exists {
-			return c.Status(fiber.StatusNotFound).SendString("Resource not found")
-		}
-
-		if ! strings.HasPrefix(res.Url, "file://") {
-
-			if res.Proxied {
-				data, err := res.GetProxied()
-				if err != nil {
-					log.Fatalln(err)
-					// we failed, send a redirect instead
-					// the next line would be the one with
-					// c.Location(res.Url)
-				} else {
-					c.Response().Header.SetContentType(res.Mime)
-					c.Response().Header.SetContentLength(len(data))
-					return c.Send(data)
-				}
-			}
-			
-			c.Location(res.Url)
-			c.Status(302)
-			return nil
-		}
-
-		data, err := res.Get()
-		if err != nil {
-			panic(err)
-		}
-
-		c.Response().Header.SetContentType(res.Mime)
-		c.Response().Header.SetContentLength(len(data))
-
-		return c.Send(data)
-	})
-
-	log.Fatal(app.Listen(conf.ResourceD.ListenURL))
-}
--- a/resource/resourced.toml.example
+++ b/resource/resourced.toml.example
@ -1,47 +0,0 @@
-
-# The resourceD config
-[resourceD]
-
-# Whether to enable the resourceD.
-# If this is false, resourceD will start but respond to
-# all requests with 404
-# It is false by default because resourceD is not required in a default installation.
-enabled=true
-
-# URL to listen on
-listen_url="0.0.0.0:80"
-
-# Minibal size of a file to be cached
-# File size is parsed via this library:
-# https://github.com/dustin/go-humanize
-proxy_cache_min_size="5MB"
-
-# Resource ID must be like a java package name
-# At least one X.X. is required
-# 
-# Examples:
-# org.university.logo
-# dev.indie_guy.logo
-# com.pany.logo
-# Test your names here: https://regex101.com/r/wQdOup/2
-[resource."com.example.logo"]
-
-# Can also be an external link
-# If an external link is specified,
-# the resource will be returned as a 302 redirect to the link
-url="file:///some/where"
-
-# File type, as according to this:
-# https://developer.mozilla.org/en-US/docs/Web/HTTP/Basics_of_HTTP/MIME_types/Common_types
-mime="image/jpg"
-
-# (if url is an http(s) url))
-# Whether to proxy the resource.
-# true  - Send the resource like a regular file
-# false - Send a 302 HTTP redirect to the URL (default)
-#
-# It is not recommended to set this to `true`
-# unless you are referring to a resource that is
-# available only in the local network
-# 
-# proxied=true
				`@ -1 +0,0 @@`
				<svg xmlns='http://www.w3.org/2000/svg' fill='currentColor' viewBox='0 0 217.2 80.2'><path stroke-linecap='round' stroke-width='.94' d='M167.5 78.8h-30.6v-1h.1a9.56 9.56 0 0 0 2.6-.34 7.21 7.21 0 0 0 3.2-1.86 7.38 7.38 0 0 0 2.08-4.19 10.34 10.34 0 0 0 .12-1.61v-57a9.37 9.37 0 0 0-.34-2.6 7.18 7.18 0 0 0-1.91-3.2 7.62 7.62 0 0 0-4.42-2.1 10.54 10.54 0 0 0-1.43-.1v-1h10.2q4.71 0 7.38-.94a9.48 9.48 0 0 0 .42-.16q1.74-.77 2.75-1.77a5.19 5.19 0 0 0 .75-.93h1v52.6l17-14.3a28.74 28.74 0 0 0 1.94-1.76q1.86-1.85 2.62-3.47a6.17 6.17 0 0 0 .34-.87 5.92 5.92 0 0 0 .09-.43q.3-1.9-1.08-2.38a2.57 2.57 0 0 0-.31-.09l-1.3-.3v-1h14.9v1l-1 .2a11.7 11.7 0 0 0-2.6.76q-1.12.47-2.28 1.2a19.22 19.22 0 0 0-.07.04q-1.94 1.22-5.2 3.84a159.62 159.62 0 0 0-2.15 1.76l-6.9 5.8 19.9 30.6a33.2 33.2 0 0 0 1.08 1.36q1.06 1.24 1.93 1.97a7.93 7.93 0 0 0 .29.22q1.4 1.05 3.1 1.05v1h-26.4v-1q2.27 0 3.13-.33a1.76 1.76 0 0 0 .17-.07q.74-.25.87-.97a1.86 1.86 0 0 0 .03-.33q0-.81-.57-2.04a11.36 11.36 0 0 0-.13-.26 85.38 85.38 0 0 0-.32-.63l-.3-.59a148.04 148.04 0 0 0-.33-.63 31.93 31.93 0 0 0-.53-.97l-.6-1.02a54.25 54.25 0 0 0-.22-.36l-11.4-18.3-3.7 3.2v15.3a9.56 9.56 0 0 0 .34 2.6 7.21 7.21 0 0 0 1.86 3.2 7.38 7.38 0 0 0 4.19 2.08 10.34 10.34 0 0 0 1.61.12h.1v1ZM9.1 80.2h-1V12.8a9.37 9.37 0 0 0-.34-2.6A7.18 7.18 0 0 0 5.85 7a7.62 7.62 0 0 0-4.42-2.1A10.54 10.54 0 0 0 0 4.8v-1h10.2a49.91 49.91 0 0 0 2.64-.06q3.77-.2 5.44-1.03a4.6 4.6 0 0 0 .02-.01 10.17 10.17 0 0 0 1.48-.9q.81-.6 1.37-1.3a5.73 5.73 0 0 0 .35-.5h1v36.4q2.3-4.5 6.45-7.2t9.15-2.7q5.9 0 10.5 3.5a22.42 22.42 0 0 1 5.7 6.49 28.24 28.24 0 0 1 1.55 3.01q2.65 6 2.65 13.7a36.88 36.88 0 0 1-.7 7.3 28.48 28.48 0 0 1-2.25 6.8q-2.95 6.1-8.25 9.5a21.45 21.45 0 0 1-9.17 3.21 27.24 27.24 0 0 1-3.23.19 21.87 21.87 0 0 1-6.22-.83 14.8 14.8 0 0 1-9.78-9.07l-9.8 9.9Zm128-34.4.1 1.5h-33.6v.5a38.84 38.84 0 0 0 .58 6.93q.7 3.87 2.26 6.98a20.6 20.6 0 0 0 1.86 3.04 15.79 15.79 0 0 0 4.92 4.45q3.36 1.9 7.68 1.9 4.8 0 9.15-2.35 4.35-2.35 7.05-6.35l.9.3q-1.7 5.1-5.3 9-3.6 3.9-8.5 6.1a25.45 25.45 0 0 1-10.07 2.2 29.25 29.25 0 0 1-.53 0q-6.9 0-12.25-3.4a22.86 22.86 0 0 1-7.97-8.7 27.29 27.29 0 0 1-.38-.75 28.67 28.67 0 0 1-2.7-9.03 36.6 36.6 0 0 1-.3-4.82 32.79 32.79 0 0 1 .77-7.28 25.67 25.67 0 0 1 2.53-6.72q3.3-6 9.05-9.35 5.75-3.35 13.05-3.35a26.46 26.46 0 0 1 6.02.66 21.48 21.48 0 0 1 4.83 1.74q4.75 2.4 7.6 6.75a20.08 20.08 0 0 1 3.04 8.13 24.45 24.45 0 0 1 .21 1.92Zm-47.2 33H59.3v-1a9.82 9.82 0 0 0 2.65-.34 7.46 7.46 0 0 0 3.2-1.81 7.12 7.12 0 0 0 2.08-3.94 10.33 10.33 0 0 0 .17-1.91v-57a9.37 9.37 0 0 0-.34-2.6A7.18 7.18 0 0 0 65.15 7a7.62 7.62 0 0 0-4.42-2.1 10.54 10.54 0 0 0-1.43-.1v-1h10.2q4.71 0 7.38-.94a9.48 9.48 0 0 0 .42-.16q1.74-.77 2.75-1.77A5.19 5.19 0 0 0 80.8 0h1v69.8q0 3.7 2.25 5.85 2.25 2.15 5.85 2.15v1ZM22.5 39.9V65a27.97 27.97 0 0 0 .52 3.96q.74 3.5 2.38 5.89 2.5 3.65 6.6 3.65 4.95 0 7.63-5.75a19.3 19.3 0 0 0 .37-.85 28.56 28.56 0 0 0 1.42-4.73Q42.7 61.3 42.7 52.5a97.73 97.73 0 0 0-.13-5.24q-.3-5.58-1.29-9.26a20.42 20.42 0 0 0-.68-2.1q-1.23-3.15-3.27-4.46A6.03 6.03 0 0 0 34 30.5a9.9 9.9 0 0 0-6.95 2.81 12.76 12.76 0 0 0-.1.09 18.73 18.73 0 0 0-3.3 4.1 16.72 16.72 0 0 0-1.15 2.4Zm186.6 11.8h-1a115.54 115.54 0 0 0-.18-6.57q-.29-5.13-1.07-9.13a148.1 148.1 0 0 0-.96-4.55q-.5-2.23-1.04-4.2a78.12 78.12 0 0 0-.65-2.25 142.68 142.68 0 0 0-1.2-3.63q-.58-1.64-1.13-3.08a78.3 78.3 0 0 0-.37-.94 18.06 18.06 0 0 1-1.17-4.4 15.99 15.99 0 0 1-.13-2.05 10.23 10.23 0 0 1 .35-2.75 7.75 7.75 0 0 1 1.95-3.4 7.7 7.7 0 0 1 4.48-2.23 10.83 10.83 0 0 1 1.62-.12 10.48 10.48 0 0 1 2.76.34 7.7 7.7 0 0 1 3.49 2.01 7.91 7.91 0 0 1 2.25 4.67 11 11 0 0 1 .1 1.48 17.47 17.47 0 0 1-.87 5.38 20.4 20.4 0 0 1-.38 1.07q-.86 2.23-1.84 5.01a284.93 284.93 0 0 0-.91 2.64q-1.6 4.6-2.85 11a59.41 59.41 0 0 0-.76 5.2q-.49 4.69-.49 10.5Zm-105.4-5.9H124q0-7.9-2.55-12.8a11.57 11.57 0 0 0-1.65-2.42 7.12 7.12 0 0 0-5.5-2.48 7.41 7.41 0 0 0-5.34 2.27q-.99.97-1.85 2.34a16.41 16.41 0 0 0-.11.19 19.79 19.79 0 0 0-1.94 4.45q-.69 2.22-1.04 4.87a43.13 43.13 0 0 0-.32 3.58Zm98.88 31.98a8.17 8.17 0 0 0 5.92 2.42 9.73 9.73 0 0 0 .1 0 8.18 8.18 0 0 0 5.9-2.5 10.03 10.03 0 0 0 .08-.08A8.17 8.17 0 0 0 217 71.7a10.28 10.28 0 0 0 0-.34 7.88 7.88 0 0 0-2.6-5.76 10.87 10.87 0 0 0-.33-.3 8.38 8.38 0 0 0-5.57-2.1 8.2 8.2 0 0 0-3.22.64 9.25 9.25 0 0 0-2.68 1.76 7.87 7.87 0 0 0-2.03 2.92 8.6 8.6 0 0 0-.57 3.18 9.73 9.73 0 0 0 0 .1 8.18 8.18 0 0 0 2.5 5.9 10.03 10.03 0 0 0 .08.08Z' font-size='12' vector-effect='non-scaling-stroke'/></svg>