fix drag and drop size

DEPLOYING.md

@@ -0,0 +1,33 @@
+# Deploying a production instance
+Hi fellow sysadmins!
+First of all, I want to thank you for using my piece of software.
+The instructions can be found below
+
+## Deploying a basic instance
+To deploy a basic instance for general public use, follow these simple steps:
+1. Clone this repo
+2. Copy `docker-compose.prod.yml` to `docker-compose.yml` and edit it to fit your environment
+3. Now, there are a few config files that need to be edited by you: `.env`, `filed/.env` and `janitord/.env`. Each directory contains an `.env.example`, and the configuration is pretty straightforward. However, if you are lost check this out: [filed config](#filed-configuration), [janitord config](#janitord-configuration).
+4. Configure fileD using `filed/config/filed.toml`. The example is in the same folder. Example contains a lot of self-documenting comments, so it should be pretty simple too.
+5. Set `REDIS_PASS` to a secure long string. Not exactly required, but this is something you would want to do
+6. Create and start containers with `docker-compose up -d`
+7. Route your top level reverse proxy to the `caddy` service or to the port that you opened via the docker compose file.
+
+## More extensive configuration
+Well, generally, time-wise, it is not really a good idea to create a custom services configuration.
+However, I will guide you through the basic minimal configuration.
+
+Basically, the most minimal blek!File is a fileD service connected to a redis database. 
+I think that if you are clinically insance, you can set these up as a systemd services or a `screen`ed program.
+
+However, its not really recommended to run this without janitorD as unused files will just clog up your filesystem. 
+The two requirements for janitorD are to have access to the fileD's usercontent directory and the Redis database. 
+The default docker configuration mounts `/opt/user_content` to the same volume for both fileD and janitorD.
+
+## FileD configuration
+Unless you are running in some kind of super customized docker compose environment, just copying the `.env.example` to `.env` should be enough to get it to run.
+
+Don't forget to set the `REDIS_PASS` to the same value across all services
+
+## JanitorD configuration
+Same as [filed config](#filed-configuration), don't forget to set `REDIS_PASS` to a valid value

README.md

@@ -1,10 +1,3 @@
-| ⚠️ This is in a rather early stage of development and shouldn't be deployed |
-| --------------------------------------------------------------------------- |
-
-Even though this project is mature enough to be deployed in a public instance,
-this is highly discouraged.  
-However, if you do this, be prepared for [DOS](https://en.wikipedia.org/wiki/Denial-of-service_attack) issues and API changes.
-<br/>
 
 <h1 align='center'>
     <img src="./filed/static/android-chrome-192x192.png"/>
@@ -16,6 +9,21 @@ blek! File is a free service that would help you with file sharing.
 
 The principle is very simple: you upload a file, then download it from another device. The file will be deleted after 1 download or 30 minutes.
 
+## Public instances
+List of official instances
+
+| Name | Administrator | URL |
+| --- | --- | --- |
+| 🌠 blek! File | b1ek &lt;me@blek.codes&gt; | [https://file.blek.codes](file.blek.codes) |
+
+To add your instance in this list, fork and open a PR.
+
+To qualify, your instance must be having:  
+1. Uploads without a password turned on
+2. Have proper ToS
+3. Come up with a unique name
+4. Have a public administrator email
+
 ## Licensing
 This software is released under GPL3 license, a copyleft license that protects users' freedom by ensuring that all future copies of this software are open source as well.
 

docker-compose.dev.yml

@@ -7,6 +7,7 @@ services:
         networks:
             bfile:
         volumes:
+            - './.git:/opt/code/.git'
             - './filed:/opt/code'
             - './filed/config:/etc/filed'
             - '/opt/code/target'

docker-compose.prod.yml

@@ -2,8 +2,8 @@ version: '3.7'
 services:
     filed:
         build:
-            context: filed
+            context: .
-            dockerfile: Dockerfile.prod
+            dockerfile: filed/Dockerfile.prod
         networks:
             bfile:
         volumes:

filed/Cargo.lock

@@ -358,7 +358,7 @@ dependencies = [
 
 [[package]]
 name = "filed"
-version = "0.1.0"
+version = "0.2.0"
 dependencies = [
  "argon2",
  "askama",

filed/Cargo.toml

@@ -1,6 +1,6 @@
 [package]
 name = "filed"
-version = "0.1.0"
+version = "0.2.0"
 edition = "2021"
 
 # See more keys and their definitions at https://doc.rust-lang.org/cargo/reference/manifest.html

filed/Dockerfile.prod

@@ -2,16 +2,17 @@
 FROM rust:alpine as builder
 
 WORKDIR /opt/build
-COPY . .
+COPY filed .
+COPY ./.git ./.git
 
-RUN apk add --no-cache musl-dev upx nodejs yarn && \
+RUN apk add --no-cache git musl-dev upx nodejs yarn && \
-    yarn global add uglify-js
+    yarn global add uglify-js@3.17.4
 
 RUN cargo b -r
 RUN strip target/release/filed && upx --best target/release/filed
 
 # --- deploy ---
-FROM busybox:musl
+FROM alpine:3.17
 
 RUN mkdir /config
 WORKDIR /config

filed/build.rs

@@ -1,5 +1,5 @@
 
-use std::{fs, path::PathBuf, ffi::OsStr, process::Command};
+use std::{fs, path::PathBuf, ffi::OsStr, process::Command, error::Error};
 
 use css_minify::optimizations::{Minifier, Level};
 
@@ -17,6 +17,19 @@ fn extfilter(valid: String, x: Option<&OsStr>) -> bool {
     ext == valid
 }
 
+fn system(cmd: &str, args: &[&str]) -> Result<String, Box<dyn Error>> {
+    let out = Command::new(cmd)
+        .args(args)
+        .output()
+        ?;
+
+    if out.stderr.len() != 0 {
+        panic!("Got this while running {cmd} with \"{}\": {}", args.join(" "), String::from_utf8(out.stderr).unwrap())
+    }
+
+    Ok(String::from_utf8(out.stdout)?)
+}
+
 fn main() {
 
     println!("cargo:rerun-if-changed=static/assets");
@@ -52,11 +65,24 @@ fn main() {
 
     scripts.iter().for_each(|asset| {
         Command::new("uglifyjs")
-            .arg("-c")
             .arg(asset)
             .arg("-o")
             .arg(asset_path(asset))
+            .arg("-c")
             .spawn()
             .unwrap();
-    })
+    });
+
+    let commit = system("git", &["rev-parse", "HEAD"]).map_err(|x| x.to_string());
+    let branch = system("git", &["rev-parse", "--abbrev-ref", "HEAD"]).map_err(|x| x.to_string());
+
+    match commit {
+        Err(err) => panic!("Can't get commit: {}", err),
+        Ok(commit) => println!("cargo:rustc-env=COMMIT_HASH={commit}")
+    }
+
+    match branch {
+        Err(err) => panic!("Can't get commit: {}", err),
+        Ok(branch) => println!("cargo:rustc-env=COMMIT_BRANCH={branch}")
+    }
 }

filed/config/filed.toml.example

@@ -84,3 +84,7 @@ sudo_delete=false
 # Whether /api/upload is enabled
 # It is not recommended to enable it if API key auth is not enabled
 upload=false
+
+# Whether curlapi is enabled
+# curl {url}/curlapi/help for more info
+curlapi=true

filed/src/config/types.rs

@@ -112,6 +112,10 @@ pub struct APISettings {
     /// Whether /api/upload is enabled
     #[serde(default)]
     pub upload: bool,
+
+    /// Whether curlapi is enabled
+    #[serde(default)]
+    pub curlapi: bool
 }
 
 impl Default for APISettings {
@@ -123,7 +127,8 @@ impl Default for APISettings {
             get_all_own_only: true,
             delete: false,
             sudo_delete: false,
-            upload: false
+            upload: false,
+            curlapi: true
         }
     }
 }

filed/src/env.rs

@@ -15,6 +15,23 @@ pub struct Redis {
     pub prefix: String
 }
 
+#[derive(Debug, Clone)]
+pub struct VersionData {
+    pub commit: String,
+    pub short_commit: String,
+    pub branch: String
+}
+
+impl Default for VersionData {
+    fn default() -> Self {
+        VersionData {
+            commit: env!("COMMIT_HASH").to_string(),
+            short_commit: env!("COMMIT_HASH").to_string().chars().take(6).collect(),
+            branch: env!("COMMIT_BRANCH").to_string()
+        }
+    }
+}
+
 #[derive(Debug, Clone)]
 pub struct Env {
     pub logging: bool,
@@ -24,7 +41,8 @@ pub struct Env {
     pub filedir: String,
     pub instanceurl: String,
     pub uploadspath: String,
-    pub confpath: String
+    pub confpath: String,
+    pub version: VersionData
 }
 
 fn get_var<T: Into<String>, O: From<String>>(name: T) -> Result<O, String> {
@@ -140,7 +158,8 @@ pub fn loadenv() -> Result<Env, Box<dyn std::error::Error>> {
                     return Err(format!("CONF_FILE is {}, which is not a file!", spath).into())
                 }
                 spath
-            }
+            },
+            version: VersionData::default()
         }
     )
 }

filed/src/web/curlapi.rs

@@ -0,0 +1,11 @@
+use warp::{Filter, reply::Reply, reject::Rejection};
+
+use super::state::SharedState;
+
+mod upload;
+mod help;
+
+pub fn get_routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
+    upload::get_routes(state.clone())
+        .or(help::get_routes(state))
+}

filed/src/web/curlapi/help.rs

@@ -0,0 +1,85 @@
+use askama::Template;
+use warp::{Filter, reply::{Reply, html}, reject::Rejection};
+
+use crate::web::{state::SharedState, pages::CurlHelpPage, rejection::HttpReject};
+
+pub async fn help(state: SharedState, ua: String) -> Result<Box<dyn Reply>, Rejection> {
+
+    if ! ua.starts_with("curl/") {
+        let page = CurlHelpPage { conf: state.config.clone(), env: state.env.clone() };
+        return Ok(
+            Box::new(
+                html(page.render().map_err(|x| HttpReject::AskamaError(x))?)
+            )
+        )
+    }
+
+    let brand = format!(
+        "{} \x1b[1m{}\x1b[0m  {}",
+        state.config.brand.instance_emoji,
+        state.config.brand.instance_name,
+        {
+            if state.config.brand.instance_name != "blek! File" {
+                "\n\x1b[90mPowered by blek! File\x1b[0m"
+            } else { "" }
+        }
+    );
+
+    let mut warns: String = String::new();
+    if ! state.config.api.curlapi {
+        warns += "\x1b[1;31mWarning: curl API is disabled on this instance.\nYou can use the web UI to upload files.\x1b[0m\n\n"
+    }
+    if ! state.config.files.allow_uploads {
+        warns += {
+            format!(
+                "\x1b[1;31mWarning: all uploads are disabled on this instance{}\x1b[0m",
+                {
+                    if let Some(reason) = state.config.files.upload_disable_reason {
+                        format!(" for this reason:\n\"{}\"", reason)
+                    } else { ".".to_string() }
+                }
+            ).as_str()
+        }
+    }
+
+    let instance = state.env.instanceurl;
+    let help =
+format!(
+"To upload a new file, you can POST it like this:
+    \x1b[32mcurl\x1b[0m \x1b[33m-X POST\x1b[0m \x1b[34m{instance}/curlapi/upload\x1b[0m \x1b[33m-F'file=@file.txt'\x1b[0m \x1b[33m-F'tos_consent=on'\x1b[0m
+You can also add a password:
+    \x1b[32mcurl\x1b[0m \x1b[33m-X POST\x1b[0m \x1b[34m{instance}/curlapi/upload\x1b[0m \x1b[33m-F'file=@file.txt'\x1b[0m \x1b[33m-F'filename=uwu'\x1b[0m \x1b[33m-F'tos_consent=on'\x1b[0m \x1b[33m-F'named=on'\x1b[0m
+The `named=on` switch is neede because this API is basically
+the HTML used at the regular web UI form wrapped into this URL
+
+\x1b[1;32mIMPORTANT:\x1b[0m Read the terms of service \x1b[1mbefore\x1b[0m uploading the file!
+The ToS can be found here: \x1b[34m{instance}/tos\x1b[0m .
+
+{warns}"
+);
+
+    Ok(
+    Box::new(
+format!("
+  \x1b[31m┓ ╻\x1b[0m \x1b[35m┏┓•┓  \x1b[0m
+  \x1b[32m┣┓┃\x1b[0m \x1b[95m┣ ┓┃┏┓\x1b[0m
+  \x1b[34m┗┛•\x1b[0m \x1b[35m┻ ┗┗┗━\x1b[0m
+
+{brand}
+{help}
+").to_string())
+)   
+}
+
+pub fn get_routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
+    warp::any()
+        .and(warp::path!("curlapi" / "help"))
+        .and(
+            warp::any()
+                .map(move || state.clone())
+        )
+        .and(
+            warp::header::<String>("user-agent")
+        )
+        .and_then(help)
+}

filed/src/web/curlapi/upload.rs

@@ -0,0 +1,139 @@
+use std::net::IpAddr;
+
+use warp::{filters::multipart::FormData, reply::{Reply, with_status}, reject::Rejection, Filter};
+use warp_real_ip::real_ip;
+
+use crate::{web::{state::SharedState, forms::{FormElement, UploadFormData}, rejection::HttpReject}, files::File};
+
+pub async fn upload(form: FormData, ip: Option<IpAddr>, state: SharedState) -> Result<Box<dyn Reply>, Rejection> {
+    if ! state.config.files.allow_uploads {
+        return Ok(
+            Box::new(
+                with_status(
+                    match state.config.files.upload_disable_reason {
+                        Some(reason) => format!("Uploads are disabled for the following reason:\n{reason}"),
+                        None => "Uploads are disabled.".into()
+                    },
+                    warp::http::StatusCode::SERVICE_UNAVAILABLE
+                )
+            )
+        )
+    }
+
+    let params = FormElement::from_formdata(form)
+        .await
+        .map_err(|x| HttpReject::WarpError(x))?;
+
+    if let Some(consent) = params.get("tos_consent") {
+        if consent.data != "on".bytes().collect::<Vec<u8>>() {
+            return Ok(
+                Box::new(
+                    format!("You need to agree to the ToS to upload a file.\nSee {}/curlapi/help for details\n\nTo agree to the ToS, add a -F'tos_consent=on'\n", state.env.instanceurl)
+                )
+            )
+        }
+    } else {
+        return Ok(
+            Box::new(
+                format!("You need to agree to the ToS to upload a file.\nSee {}/curlapi/help for details\n\nTo agree to the ToS, add a -F'tos_consent=on'\n", state.env.instanceurl)
+            )
+        )
+    }
+
+    let formdata = UploadFormData::from_formdata(params, true);
+    if let Some(formdata) = formdata {
+
+        let mut breaks_conf = false;
+        if (!state.config.files.allow_custom_names) && formdata.filename.is_some() {
+            breaks_conf = true;
+        }
+        if (!state.config.files.allow_pass_protection) && formdata.password.is_some() {
+            breaks_conf = true;
+        }
+
+        if breaks_conf {
+            return Ok(
+                Box::new(
+                    with_status(
+                        "Attempt to set name or password when they are disabled".to_string(),
+                        warp::http::StatusCode::BAD_REQUEST
+                    )
+                )
+            );
+        }
+
+        if let Some(pass) = state.config.files.upload_pass {
+            let pass_valid: bool;
+            if let Some(upass) = formdata.instancepass {
+                pass_valid = upass == pass;
+            } else {
+                pass_valid = false
+            }
+
+            if ! pass_valid {
+                return Ok(
+                    Box::new(
+                        with_status(
+                            "Invalid instance password".to_string(),
+                            warp::http::StatusCode::BAD_REQUEST
+                        )
+                    )
+                );
+            }
+        }
+
+        let file = File::create(
+            formdata.file,
+            formdata.mime,
+            formdata.filename.clone(),
+            state.env.clone(),
+            formdata.delmode,
+            formdata.password,
+            ip
+        ).await.map_err(|x| HttpReject::StringError(x.to_string()))?;
+
+        state.file_mgr.save(&file, formdata.lookup_kind).map_err(|x| HttpReject::StringError(x.to_string()))?;
+
+        return Ok(
+            Box::new(
+                format!(
+                    concat!(
+                        "File uploaded successfully.\n",
+                        "It is available via this link:\n\n",
+
+                        "{}/upload/{}\n"
+                    ),
+                    state.env.instanceurl,
+                    urlencoding::encode(
+                        match formdata.filename {
+                            Some(name) => name,
+                            None => file.hash()
+                        }.as_str()
+                    )
+                )
+            )
+        );
+
+    } else {
+        Ok(
+            Box::new(
+                with_status(
+                    "Invalid form".to_string(),
+                    warp::http::StatusCode::BAD_REQUEST
+                )
+            )
+        )
+    }
+}
+
+pub fn get_routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
+    warp::post()
+        .and(warp::path!("curlapi" / "upload"))
+        .and(warp::multipart::form())
+        .and(real_ip(vec![state.env.proxy_addr]))
+        .and(
+            warp::any()
+                .map(move || state.clone())
+        )
+        .and_then(upload)
+}

filed/src/web/forms.rs

@@ -17,9 +17,9 @@ use crate::files::{File, lookup::LookupKind, DeleteMode};
 use super::{state::SharedState, pages::{UploadSuccessPage, ErrorPage}, rejection::HttpReject};
 
 #[derive(Debug, Serialize, Clone)]
-struct FormElement {
+pub struct FormElement {
-    data: Vec<u8>,
+    pub data: Vec<u8>,
-    mime: String
+    pub mime: String
 }
 impl FormElement {
     
@@ -58,15 +58,15 @@ impl FormElement {
     }
 }
 
-struct UploadFormData {
+pub struct UploadFormData {
-    filename: Option<String>,
+    pub filename: Option<String>,
-    password: Option<String>,
+    pub password: Option<String>,
-    instancepass: Option<String>,
+    pub instancepass: Option<String>,
-    lookup_kind: LookupKind,
+    pub lookup_kind: LookupKind,
-    delmode: DeleteMode,
+    pub delmode: DeleteMode,
-    file: Vec<u8>,
+    pub file: Vec<u8>,
-    mime: String,
+    pub mime: String,
-    tos_consent: bool
+    pub tos_consent: bool
 }
 
 impl Default for UploadFormData {
@@ -86,7 +86,7 @@ impl Default for UploadFormData {
 
 impl UploadFormData {
 
-    pub fn from_formdata(data: HashMap<String, FormElement>) -> Option<UploadFormData> {
+    pub fn from_formdata(data: HashMap<String, FormElement>, use_defaults: bool) -> Option<UploadFormData> {
         let mut out = Self::default();
         
         // Add a name
@@ -125,7 +125,9 @@ impl UploadFormData {
                 }
             },
             None => {
-                return None
+                if ! use_defaults {
+                    return None
+                }
             }
         }
 
@@ -169,7 +171,7 @@ pub async fn upload(form: FormData, ip: Option<IpAddr>, state: SharedState) -> R
     }
 
     let params: HashMap<String, FormElement> = FormElement::from_formdata(form).await.map_err(|x| HttpReject::WarpError(x))?;
-    let formdata = UploadFormData::from_formdata(params.clone());
+    let formdata = UploadFormData::from_formdata(params.clone(), false);
 
     if let Some(formdata) = formdata {
 

filed/src/web/mod.rs

@@ -2,32 +2,28 @@
  web - The part of filed that handles everything related to HTTP
  */
 
-use std::env::current_dir;
-
 use static_dir::static_dir;
 use warp::{Filter, reply::Reply, reject::Rejection};
 
 use crate::{env::Env, files::lookup::FileManager, config::types::Config};
 
 mod pages;
-mod forms;
+pub mod forms;
 pub mod state;
 mod rejection;
 mod api;
 mod uploaded;
+mod curlapi;
 
 use state::SharedState;
 
 pub fn routes(state: SharedState) -> impl Filter<Extract = impl Reply, Error = Rejection> + Clone {
-    let staticpath = current_dir().unwrap();
+    static_dir!("static")
-    let staticpath = staticpath.to_str().unwrap().to_string() + "/static";
+        .or(curlapi::get_routes(state.clone()))
-
+        .or(pages::get_routes(state.clone()))
-    pages::get_routes(state.clone())
         .or(forms::get_routes(state.clone()))
         .or(api::get_routes(state.clone()))
         .or(uploaded::get_uploaded(state))
-        .or(static_dir!("static"))
-        .or(warp::fs::dir(staticpath.to_string()))
 }
 
 /*

filed/src/web/pages.rs

@@ -88,6 +88,14 @@ pub struct ErrorPage {
     pub link_text: Option<String>
 }
 
+#[derive(Template)]
+#[template( path = "curlapi_help.html" )]
+#[allow(dead_code)]
+pub struct CurlHelpPage {
+    pub env: Env,
+    pub conf: Config
+}
+
 pub async fn uploaded(query: HashMap<String, String>, state: SharedState) -> Result<Html<String>, Rejection> {
 
     if ! query.contains_key("file") {

filed/static/assets/alert.css

@@ -24,4 +24,7 @@
 
 .alert.blue .alert-title {
     background: #203050;
+}
+.alert.green .alert-title {
+    background: #205030;
 }

filed/static/assets/code.css

@@ -0,0 +1,23 @@
+.code {
+    display: block;
+    padding: 1em;
+    border: 1px solid var(--header-sec-color);
+    border-radius: 12px;
+    overflow-x: auto;
+}
+.code .inner {
+    width: max-content;
+    display: block;
+}
+.code-inline {
+    display: inline;
+    background: #00000010;
+    border: 1px solid #c2c4c210;
+    border-radius: 4px;
+    padding: 2px 4px;
+}
+
+.code, .code-inline {
+    font-family: monospace;
+    line-height: 1.5em;
+}

filed/static/assets/dragndrop-form.js

@@ -6,6 +6,11 @@
 
         /** @type {HTMLElement} */
         const root_drag_rop = document.getElementsByClassName('file-drag-n-drop')[0];
+
+        // make the root drag&drop element an ideal circle
+        root_drag_rop.style.width   = root_drag_rop.offsetWidth + 'px';
+        root_drag_rop.style.height  = root_drag_rop.offsetWidth + 'px';
+
         /** @type {HTMLElement} */
         const drag_rop = document.getElementsByClassName('file-drag-n-drop-inside')[0];
         const dr_rop_t = document.getElementsByClassName('file-drag-n-drop-inside-text')[0];

filed/static/assets/upload_form.css

@@ -1,7 +1,7 @@
 .file-drag-n-drop {
     display: block;
     cursor: pointer;
-    width: 440px;
+    width: 100%;
     height: 440px;
     background: var(--header-sec-color);
     border-radius: 16px;

filed/templates/base.html

@@ -66,6 +66,13 @@
                         <tr>
                             <td>
                                 <small>Made with Rust and &lt;3</small>
+                                
+                                <small style="display:block">
+                                    Version
+                                    <a href="https://git.blek.codes/blek/bfile/commit/{{ env.version.commit }}" target="_blank">
+                                        {{ env!("CARGO_PKG_VERSION") }} ({{ env.version.branch -}}/{{- env.version.short_commit }})
+                                    </a>
+                                </small>
                     
                                 <ul style='margin:10px 0'>
                                     <li>

filed/templates/curlapi_help.html

@@ -0,0 +1,114 @@
+
+{% extends "base.html" %}
+
+{% block head %}
+<link rel='stylesheet' href="/code.css" />
+<link rel='stylesheet' href="/alert.css" />
+<link rel='stylesheet' href="/js-only.css" />
+<style>
+.copy-btn { font-size: 70%; transform: translateY(-25%); display: inline-block }
+</style>
+{% endblock %}
+
+{% block body %}
+
+<div style="max-width:95vw;width:fit-content;margin:0 auto">
+    <h1 style="text-align:center">Curl API</h1>
+    <p>
+        blek! File has an API for uploading files via cURL.
+        To upload a file via cURL, follow these instructions:
+    </p>
+    <p>
+        To upload a file, POST it like this:
+        <a href="#" class="copy-btn" data-clipboard-text="curl -X POST {{env.instanceurl}}/curlapi/upload -F'file=@file.txt' -F'tos_consent=on'">
+            Copy!
+        </a>
+    </p>
+    <div class='code'>
+        <span class='inner'>
+            <span style='color:green'>curl</span>
+            <span style='color:orange'>-X POST</span>
+            <span style='color:darkcyan'>{{env.instanceurl}}/curlapi/upload</span>
+            <span style='color:orange'>-F'file=@file.txt'</span>
+            <span style='color:orange'>-F'tos_consent=on'</span>
+        </span>
+    </div>
+    <p>
+        To add a password, do it like this:
+        <a href="#" class="copy-btn" data-clipboard-text="curl -X POST {{env.instanceurl}}/curlapi/upload -F'file=@file.txt' -F'filename=uwu' -F'tos_consent=on' -F'named=on'">
+            Copy!
+        </a>
+    </p>
+    <div class='code'>
+        <span class='inner'>
+            <span style='color:green'>curl</span>
+            <span style='color:orange'>-X POST</span>
+            <span style='color:darkcyan'>{{env.instanceurl}}/curlapi/upload</span>
+            <span style='color:orange'>-F'file=@file.txt'</span>
+            <span style='color:orange'>-F'tos_consent=on'</span>
+            <span style='color:orange'>-F'named=on'</span>
+        </span>
+    </div>
+    <p>
+        Note that the
+        <span class='code-inline'>named=on</span>
+        switch is required.
+        Its needed because the curl API is basically a wrapper of
+        <a href="/">this</a>
+        HTML form.
+    </p>
+    
+    <div class="alert green">
+        <h1 class="alert-title">
+            Important
+        </h1>
+        <p class="alert-text">
+            Read the
+            <a href="/tos">Terms of Service</a>
+            <b>before</b>
+            uploading a file.
+            <br/>
+            You agree to them by adding the
+            <span class="code-inline">tos_consent=on</span>
+            switch.
+        </p>
+    </div>
+
+    <div class='alert blue'>
+        <h1 class='alert-title'>Web UI</h1>
+        <div class='alert-text'>
+            <p>
+                Hey, it looks like you are viewing this page from a browser!<br/>
+                You can use the Web UI as well to upload a file!
+            </p>
+            <p style='margin:32px 0'>
+                <a href='/' role='button' class='btn'>
+                    Go to the web UI
+                </a>
+            </p>
+        </div>
+    </div>
+</div>
+
+{% endblock %}
+
+{% block scripts %}
+<script src="https://unpkg.com/clipboard@2/dist/clipboard.min.js"></script>
+<script>
+    new ClipboardJS('.copy-btn');
+{#- -#}
+    ( {#- -#}
+        () => { {#- -#}
+            let btns = document.getElementsByClassName('copy-btn') {#- -#}
+            for (const button of btns) { {#- -#}
+                button.onclick = () => { {#- -#}
+                    let old = button.innerHTML; {#- -#}
+                    button.innerHTML = 'Copied!'; {#- -#}
+                    setTimeout(() => { button.innerHTML = old }, 500); {#- -#}
+                } {#- -#}
+            } {#- -#}
+        } {#- -#}
+    )() {#- -#}
+</script>
+<script src='/js-only.js'></script>
+{% endblock %}

janitor/.env.example

@@ -5,5 +5,5 @@ REDIS_PREFIX=bfile-
 
 USERCONTENT_DIR=/opt/user_uploads
 
-CLEAN_DEL=30 minutes
+CLEAN_DEL=30min
-CLEAN_ERRDEL=2 minutes
+CLEAN_ERRDEL=2min

janitor/Dockerfile.prod

@@ -10,7 +10,7 @@ RUN cargo b -r
 RUN strip target/release/janitor && upx --best target/release/janitor
 
 # --- deploy ---
-FROM busybox:musl
+FROM alpine:3.17
 
 RUN mkdir /config
 WORKDIR /config